Sharing new technology and ideas of different industries and different machinery.
Giving the introduction of Stretch wrap machine, shrink wrap machine and upender or turnover machinery as well as hose coiler&cable coiling machinery of application in different industries.
By Upender | 21 June 2022 | 1 Comments

The model and driving methods of the 90 degree flipper machine

The 90-degree flipping machine is a frequently used equipment in modern industrial production. It is mainly used for the 0-90-degree reciprocating turning/rotating of workpieces or products, which is conducive to the operation of the next process.

Model of the flipping device:
In view of the different workpieces and driving methods, the 90-degree turning equipment has also been subdivided into multiple models. Our conventional models are mainly based on products, such as FZ-CT for turning coils and rolls, FZ-ME for flipping injection molds and casting die. Also there is FZ-HT and FZ-HR which are based on the hydraulic driving mothods. About the max load of each flipping machine, there is also FZ-CT-05, FZ-CT-10, FZ-CT-20....This is only a rough classification by weight, and it is also a well-known flipping device model on the market.
steel coil roll 90 degree flipping and turning machine injection mold flipper machine
Driving method of flip equipment:
From the transmission mode, it can also be distinguished between the hydraulic flipping machine and the mechanical flipping machine (motor driven), and it can even be driven by a cylinder for a small weight. The sales staff of our factory mainly recommend the driving method and equipment model of the turning equipment suitable for you based on the shape, size and weight of the workpiece. Generally, for relatively regular workpieces, we will recommend you to use a mechanical flipping machine, and for special-shaped workpieces, you are recommended to use a hydraulic flipping machine. The sales staff will systematically explain the advantages and disadvantages of using different forms of drive for your reference.
hydraulic flipping machinehydraulic steel coil upender machine

The countertop of the flipping device:
The countertop of the flipping machine is a very critical part. It is precisely fitted to the workpiece. A reasonable countertop design will be an important guarantee for safe production. At the same time, it can also protect the workpiece and the equipment from damage and prolong the service life of the equipment.
For relatively regular workpieces, mechanical flipping machines are used, because the deviation of the center of gravity is not very large, the workpieces are relatively flat, the load-bearing range is relatively large, and the equipment requirements are minimal. The use of turning equipment for this type of workpiece is also very large in the market. For example, injection molds, steel coils, etc., cylindrical workpieces need to be equipped with V-shaped protection on the table to prevent rolling and keep it stationary.
For irregular workpieces, fixed or movable brackets, openings, fixtures, etc. can be installed on the table to realize the fixation of the workpiece, so that the workpiece and the table are connected as a whole or limited in space to achieve safe and efficient production.

Recently Reviews

Read More

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code