Sharing new technology and ideas of different industries and different machinery.
Giving the introduction of Stretch wrap machine, shrink wrap machine and upender or turnover machinery as well as hose coiler&cable coiling machinery of application in different industries.
By Coil wrapper | 12 September 2022 | 0 Comments

How to make bale or bundle for steel coils and rods?

Steel coils and steel rods are one of several types of steel commonly produced by steel mills. Steel coil packing is essential! How to use the steel coil baler for baling?

Tools/Materials:
One split steel strapping machine, one packing strap, one packing buckle;
Air pump (air compressor), air pipe, packing protection equipment.
strapping bundles of steel rods
Method/step:
As shown in the picture, first put the clip on the strapping band, and wrap the steel belt around the object to be bundled. Insert into the clip, fold in half about 50mm away from the clip, make the packing belt not to fall off!
bundling machine of the steel rods
As shown in the picture, hold the reduction box and use your thumb, press down the strap handle A to pass through the upper steel strap of the button. Insert between the tightening roller and the teeth of the rolling plate, and then loosen handle.
bundling of steel rods
The speed control valve at the rear of the reduction box has a stop, half-open, full-open third gear position, as shown in the picture, clockwise. Rotate the speed control valve, tighten the wheel rotation and pass through the button. When the steel belt is stretched to saturation, tighten the rollers. Stop rotating, but the speed control valve is still fixed at the fully open Location!
steel rods bundle strapping
As shown in the picture, place the movable jaw of the buckle machine on the buckle. On the sub, press the main valve stem to make the clamping machine perform clamping. After the operation is completed, loosen the main valve stem and clamp the machine.
the strapping for steel rods bundles
As shown in the picture, put the tensioner in the upward vertical position. The tilting action to break the steel belt. Broken steel belt. After that, the speed control valve will be rotated counter clockwise to stop location.

Precautions:
The speed control valve cannot be closed before the packing is completed, otherwise the steel belt may fall back and loosen!
If the air pressure is insufficient, the tensioner may not work if the pressure is not maintained, and sufficient air pressure must be maintained.

Also except the strapping methods, another practical packaging method for these steel related products is stretch wrapping. There are both coil wrapping machine and orbital stretch wrapping machine for steel coil packaging and steel rod bundles wrapping packaging. The wrapped steel coils and bundles are more protected with airtight package to against vapor, dust and rain........

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code