Side strapping machines are a common type of balers. In terms of the degree of automation, they are divided into automatic and fully automatic types. However, no matter which type of balers, they need to be used together with a conveyor line. The side balers has a certain difference with other strapping machines. Its movement of strapping head is on the side and the bonding point is also on the side. Therefore, it is slightly different from other equipment when packing items. Here, We will share with you the use of the side strapping machine and the common precautions.
1. Items must be delivered along the side close to the movement. Because the core of the side strapping machine is on the side, it is required that the items must be brought close to the side of the core, so that the binding can be tight, otherwise it will be tied into a large circle and loose.

2. The height of the frame cannot be shorter. Many users think that the height can be made very low when using the side strapping machine, because the item is not that big, but in fact, the frame height of the side strapping machine labeling machine is already the lowest. It can be made high, but not Even lower, including the height of the frame from the ground is not infinitely dropable, generally it can be as low as 200mm from the ground.

3. Tray products cannot be bundled. Many users need to bundle items with pallets. In other factories, you may have seen that the strapping machine seems to be similar to the side strapping machine. But here we want to remind you that the strapping pallet type packer and the side strapping machine are completely Not the same, pay attention here. The side strapping machine can only strap a single product, not a pallet.

Your email address will not be published.Required fields are marked. *