Sharing new technology and ideas of different industries and different machinery.
Giving the introduction of Stretch wrap machine, shrink wrap machine and upender or turnover machinery as well as hose coiler&cable coiling machinery of application in different industries.
By Steel coil tipper | 27 October 2020 | 0 Comments

Coil tipper a simple machine but necessary and crucial

Coil tipper designed to up end steel coils or aluminum coils. They look very simple and basic from the appearance, but plays a critical role in many industries as they need to turnover their products to do certain operation and process.
For example, steel coils need to anneal inside a furnace as a kind of heat treatment to gain high performance or meet certain standards. For doing that, a piece of convector should be placed under the steel coil before into the furnace.
steel or aluminum coil upender-tipper
But most times, steel coils come from the automatic cutting and rewinding line and stay in a horizontal position. When we need change the direction from the horizontal position to vertical position, the coil tipper is a necessary machine to be used in this transfer.
In situation of no this kind of turnover machine, workers will need to tilt the heavy coil with the cooperation of chain and hoist or forklift. But it's a very dangerous and risky operation as these products usually are very heavy which may up to 30 tons per piece.
Also, the use of a coil tipper avoid damage to products which usually happen during manual operation. It maybe a hit on the heavy products or machine, mostly a scratch on the surface. Total capacity will be increased dramatically as the speed of turnover of the coil tipper is much higher than manual operation. 

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code