By Steel coil upender | 12 September 2022 | 0 Comments
The advantage of using turning machine and flipping machine
Turning machine performance characteristics:
1. The turning machine has a V-shaped table, which can effectively promise the stability of cylindrical products during turning.
2. Electromagnetic brake motor, in case of power failure during the reversal process, the machine will automatically lock and stop rotating, and there will be no reversal.
3. The turning machine can adjust the turning angle of the product slightly less than 90 degrees, which can effectively prevent the product from tipping.
4. The overturning machine can be protected by multiple limit positions and ensure safety. It is equipped with a mechanical limit device. If the electronic control fails, the absolute safety of the machine and the operator can also be guaranteed. And the device has overweight limit function.
5. The turning machine has a double row sleeve roller chain and all bearings, which are all made by domestic well-known professional manufacturers. The sprocket is mechanically driven, and the chain tension can be adjusted in two places.
6. The turning machine has four load-bearing idler mechanisms, and the spacing can be adjusted according to the actual use to ensure the operation level. The turning machine can turn vertical rolls into horizontal rolls, or turn horizontal rolls into vertical rolls, and cycle work.
The turning machine is easy to operate:
1. Turn on the power.
2. Turn on the power switch and release emergency stop button.
3. Put the product to be flipped on the flipping machine platform.
4. Operate the "flip" switch or wireless remote control switch (optional), and the machine starts to work automatically: the flip body runs.
5. After the flipping machine is completed, the work is over and it stops automatically.
6. The operator manually presses the travel switch, the plate on the guide rail is smooth separated from the rolled plate, and the rolled plate can be reset after changing.
1. The turning machine has a V-shaped table, which can effectively promise the stability of cylindrical products during turning.
2. Electromagnetic brake motor, in case of power failure during the reversal process, the machine will automatically lock and stop rotating, and there will be no reversal.
3. The turning machine can adjust the turning angle of the product slightly less than 90 degrees, which can effectively prevent the product from tipping.
4. The overturning machine can be protected by multiple limit positions and ensure safety. It is equipped with a mechanical limit device. If the electronic control fails, the absolute safety of the machine and the operator can also be guaranteed. And the device has overweight limit function.
5. The turning machine has a double row sleeve roller chain and all bearings, which are all made by domestic well-known professional manufacturers. The sprocket is mechanically driven, and the chain tension can be adjusted in two places.
6. The turning machine has four load-bearing idler mechanisms, and the spacing can be adjusted according to the actual use to ensure the operation level. The turning machine can turn vertical rolls into horizontal rolls, or turn horizontal rolls into vertical rolls, and cycle work.
The turning machine is easy to operate:
1. Turn on the power.
2. Turn on the power switch and release emergency stop button.
3. Put the product to be flipped on the flipping machine platform.
4. Operate the "flip" switch or wireless remote control switch (optional), and the machine starts to work automatically: the flip body runs.
5. After the flipping machine is completed, the work is over and it stops automatically.
6. The operator manually presses the travel switch, the plate on the guide rail is smooth separated from the rolled plate, and the rolled plate can be reset after changing.
Leave a Reply
Your email address will not be published.Required fields are marked. *
CATEGORIES