The pass through type pallet inverter is an inline equipement for the upending of pallet and skid 180 degree. It's widely used in the carton printing industry which built to connect with the feeder of the printer with connected conveyor from the beginning to load the piles of cartons or thick paper sheets to the upending station. It's easy for changing the upside of the cartons and paper, also available to remove the pallets and skids as they are upended to the very top of the pile.


Here are the machine’s characteristics:
Four-roller equipment with special double chain drive, oblique gear & worm speed reducer,  running smoothly and reliably.
Usage effective, fast, durable and safe with inverter controls system.
Separate console can control the machine easily over a long distance away.
Multiple position limit system and protective guardrail ensure secure operation,  The machine can be stopped at random; object will stay in current position.
Machine stops automatically once the tilting finishes.
Press Emergency Stop Button to stop the machine quickly.
Duty-cycle operation between tilting and resetting.
Optional conveyors are available for automatic and efficiently transferring products to be tilted or being tilted.
The roller and the turning base are equipped with safety guards to ensure the safety of personnel.
With over-current protection device, if the turning machine exceeds the maximum weight of turning, it will automatically power off and stop protection without damaging the motor.
Equipped with brand air switch, including over-current, overload, short circuit, phase loss protection functions.
The inner bearing of the roller adopts solid self-lubricating copper sleeve bearing, which is wear-resistant, high-temperature resistant, graphite lubrication does not need to be oiled, and the radial bearing capacity is greater.
The control system adopts 24V safety voltage to ensure the safe operation of employees.
The electrical part adopts leakage protection circuit breaker, overload circuit breaker, and overcurrent protection contactor to effectively prevent the potential safety hazards caused by leakage and overload.
Equipment motor starts with slow start and slow stop, running smoothly and quickly. There will be no sudden collapse.
Adopt hard-tooth helical gear industrial reducer, with low noise, large torque, and more stable operation.
The whole machine is spray-painted and painted, and the machine is beautiful and generous.
The motor has a parking brake self-locking function, which can stop at any position, and the flip body is locked in place, which is safe and reliable.
The fuselage adopts Q235 all-steel welded structure, which has sufficient strength and rigidity. Both the turning table and the fuselage are made of 6-20mm thick high-quality medium plates.
The rollers and shafts are all made of 45# round steel by lathe finishing, and have undergone high temperature quenching treatment. Has high strength.
Turning machine drive system: It adopts mechanical chain transmission, and the motor adopts helical gear reducer motor, which has stronger torque. The chain adopts domestic well-known brand (self-improvement), double-row double-channel chain, to ensure stable and reliable turning. The rotation starts slowly, which effectively protects the reducer from damage caused by the sudden energization and acceleration of the motor, and effectively extends the service life of the reducer.
Use Taiwan Delta frequency converter for flip speed regulation.
1 set of pneumatic control system, including solenoid valve/oil-water separator/guide shaft, etc.;
Electric control system 1 set of frequency converter; induction switch, etc.;
Turn over various protections (electrical and mechanical) of the turning machine.
Using traditional chain mechanical transmission.
The lifting and lowering of the pressing device is automatically adjusted.
The maximum load-bearing capacity of turning is 2000kg+20% (must be within the safety factor).
Adopt pneumatic system, four cylinders push the inner pressure plate support of the turning machine to compress the product; adopt pneumatic technology, after the product is turned over, the four cylinders can.
In order to avoid buffering and inertia, the speed of cylinder advancement and retraction can be manually adjusted to a suitable speed.
The turning body is integrally welded, polished, heat treated, erected, and adjusted.
The turning machine is self-locking protection during power failure.
Special transmission sprocket box, unique middle double sprocket transmission, chain relaxation can be adjusted.
It can "flip" and "reset" positive and negative cycles.
Inverter vector speed regulation, multi-stage speed regulation operation.
Geared motors of well-known domestic brands.
Double braking with low torque and deceleration brake to ensure the safety of turning over.
The use of an independent console improves the operability and maintainability.
Four supporting wheel mechanism, adjustable diagonal deviation.
Equipment fixing method: horizontal installation or foot installation.
Standard 5-meter wire control, independent control.