Automatic side sealing shrink wrap machine SW-M600

A fully automatic shrink wrap machine for products such as boards, panel, groceries...... high efficiency, easy operation panel and control system, suitable for non-professionals.
  • Standard machine: Yes
  • Machine in stock: Yes
  • Description
    Fully automatic side-sealing shrink wrap machine SW-M600 is a suitable machine for packing large quantity products with automatic line.
    More types of shrink wrappers, please visit our product category: Shrinkwrap Machines
    carpet roll and roofing roll packing machine by heat shrinking
    From material feeding to film perforation to bag forming to shrinking, all the actions are down by the machine at one time.
    Continuous sealing and cutting makes the machine highly efficient. Different heights and widths are tolerable, film guide system can be manually adjusted.
    Features
    Horizontal heat sealing blade for the sealing part vertically driven, constant temperature side sealing device for longitudinal sealing, beautiful sealing effect which is straight and firm.
    Heating sealing and cutting system with constant temperature for various industrial standard shrink films such as POF.
    Handwheel is used to adjust to adapt to products with different packaging specification, increases reliability and easier operation.
    Longitudinal sealing blade performs continuous sealing and cutting action, unlimited product length.
    Continuous and smooth action for sealing and cutting make the sealing action.
    Without replacement, very simple operation for maintenance.
    Feeding length control is combined with electric eye detection and timer to accurately control the length of the film, making the shrinkage effect easier to control.
    Two sets of horizontal and vertical photoelectric sensor, which are easy to switch and choose.
    Automatic waste material recycling, helps to do contribution to the environment protection and resource saving.
    thermal sealer and triangle forming board
    air filter for the shrink wrapping machine
    electrical motor driven conveyor belt
    Technical Parameter
    Sealing type side sealing
    Power supply 380V/50-60Hz/3phase
    Sealing height ≤250mm
    Sealing width ≤500mm
    Product size width+height≤700mm
    Product length unlimited
    Packing capacity upon product's length
    Film type center-folded polyolefin (POF) film or polyethylene(PE)film
    Max film roll dimension 850mm(width) x 280mm(outer diameter)
    Power consumption 12.5kw
    Heat tunnel conveyor chains with silicon coated rods
    Air pressure ≤0.5MPa
    Sealing system special durable alloyed sealing blade with anti-stick Teflon coats
    Weight 800kg
    Optional Accessories
    Extra conveyor
    add extra conveyors to the machine
    Shrink tunnel extension
    extending the shrink tunnel size



    Product Overview

    This is a fully automatic side-sealing machine for high-volume shrink wrapping. Products come straight off your production or packing line: the machine perforates the film, forms it into a bag, seals it along the side, and passes the pack through the heat tunnel in one continuous cycle. Because the seal runs along the length of the product rather than around it, long items keep moving while they are wrapped — the reason this model suits lines that need steady output instead of pack-by-pack handling. It is the machine to look at when hand wrapping has become the slowest step of the day and the seal quality changes from operator to operator. We build it as a standard model, and since we make this shrink wrapping machine ourselves, we help set the film, guides and sealing parameters to match what you pack.

    Key Features

    • Continuous sealing and cutting — the sealing head moves with the product instead of stopping between packs, so product length is not limited and the wrapper keeps pace with the rest of the line.
    • Feeding length control — an electric eye and a timer set how much film is fed for each pack, which keeps the shrink result consistent from the first pack of a run to the last.
    • Switchable photoelectric sensors — two sensor sets, one horizontal and one vertical, are fitted so detection can be matched to the way the product arrives on the conveyor.
    • Automatic waste-film recycling — trim left after sealing is collected by the shrink wrap machine as it runs, keeping the packing area clean and reducing the film thrown away.

    Specifications

    ItemSpecification
    Sealing bladeHorizontal heat sealing blade, vertically driven
    Temperature controlConstant-temperature sealing
    Heat tunnelConveyor chains with silicon-coated rods
    Conveyor driveElectric motor driven
    Machine typeFully automatic, standard model

    Applications

    • Flat boards and panels — wrapped flat through the side-sealing head, so faces and edges stay covered while packs are stacked, stored or loaded out.
    • High-volume production runs — where one product family goes through continuously and the wrapping step has to hold the line's pace without an operator standing at the sealer.
    • Boxed consumer and grocery goods — an automatic shrink wrap machine like this one closes boxed packs in clear, tight film instead of tape, giving a tidier pack than a hand-sealed carton.
    • Lines moving away from hand wrapping — replacing manual wrap-and-tape stations where output depends on who is on shift.
    • Dispatch packing — goods are wrapped as they come off the line, so the wrapping step no longer holds up loading.

    Operation & Daily Care

    Daily care on an industrial shrink wrap machine is mostly about keeping the film path and the seal area clean. Before a shift, check the sealing blade for film build-up, thread a fresh roll of film, and run one pack through to confirm the seal and the shrink look right. Give the heat tunnel time to reach its working temperature before production starts, so the first packs of the day are not under-shrunk. At the end of the shift, clear trim and dust from around the sealing head and wipe down the tunnel conveyor. None of this calls for specialist tools, and the machine is laid out so an operator can reach the sealing head and the film path without dismantling anything.

    Ordering Notes

    1. Send us the dimensions and weight of the products you will wrap, and we will check them against the sealing limits before you commit.
    2. Confirm the film you plan to run, so the film guide and the sealing settings are matched to your material from the start.
    3. Tell us what power supply and compressed air are available where the machine will stand, so connection work is planned before delivery.
    4. Describe how the wrapper will sit in your line — infeed, take-away, and the space your operators need around the sealing head and the tunnel.
    5. Ask which spare blades and wear parts are worth holding on site, so a blade change never stops production.

    FAQ

    Which shrink films can this machine run?

    This heat shrink machine runs center-folded polyolefin (POF) film or polyethylene (PE) film — both standard industrial shrink films. The film holder accepts rolls up to 850 mm wide and 280 mm in outer diameter, so check your roll format against those figures before stocking up on film.

    How large a product can it wrap?

    The sealing head on this industrial shrink wrap machine takes products up to 250 mm high and 500 mm wide, and combined width plus height can reach 700 mm. Measure the product as it will actually be wrapped, including any edge protection or stacked sheets, and send us the figures if your pack sits close to those limits so we can confirm the fit.

    Do operators need a technical background to run it?

    No. This automatic shrink wrap machine has a straightforward operation panel and control system, so line staff can run it after a short introduction. Day-to-day running means threading film, checking the seal and watching the packs come off the tunnel.

    How do I switch the machine over to a different product size?

    You adjust the film guide system and the handwheel to suit the new width and height, so no parts have to be swapped out. The change is mechanical and quick, which keeps the machine practical when widths or heights change during a shift.

    Can extra conveyors or a longer heat tunnel be added?

    Yes. Optional extras for this shrink wrap machine include additional conveyor sections for the infeed or take-away side, and a longer shrink tunnel for bigger packs. If you expect to run a wider product mix later, plan those additions when you order rather than retrofitting them afterwards.

    Does the machine need a compressed air supply?

    Yes — this heat shrink machine runs with an air supply rated up to 0.5 MPa. Many plants already have a line nearby, but check the pressure at the point where the machine will stand, since a weak or fluctuating supply shows up as an inconsistent seal.