Rotary arm skid wrapper machine TP-XB140

The semi-auto rotary arm wrapper machine used for stretch wrapping wooden skid and pallet cargo. Lift dead weight easy to remove and transport, a good helper for wrapping cargo in small workshops.
  • Standard machine: Yes
  • Machine in stock: No
  • Description
    TP-XB140 is a semi-automatic rotary arm wrapper machine with one column only to perform the stretch wrapping job at small workshop with limited space.
    rotary arm skid stretch wrapping machine
    Rotary arm stretch wrapping machine fixed by dead weight, stable and reliable.
    Light dead weight convenient for removing and transportation.
    Pre-stretched wrapping material for tightly wrapped skids and reduce wrapping material consumption.
    Features
    Semi-auto skid wrapper machine to improve work efficiency.
    Convenient button control without complex operation.
    Extended beams to reduce the vibration during rotation.
    Automatic height sensoring, detecting the top of goods without any manual assistance.
    Pre-stretch function, tighten the package while saving more packing material.
    Adjustable tension control, available to use different packing material.
    Overlapping rate adjustable, skid top and bottom reinforce wrapping settable on display.
    Initial position automatic return after wrapping.
    Speed of rotary arm and film carriage are controlled by inverters, prevent potential risks to the engines and extend the worklife of machine.
    semi-automatic rotary arm pallet wrapper
    rotary arm pallet wrapper and pallet packer
    film carriage of the rotary arm pallet wrapping machine
    Technical Parameter
    Max skid/pallet dimension L:1200mm * W:1200mm
    Wrapping height max 2000mm
    Max load unlimited
    Film roll dimension ID( paper core): 76mm, OD: max 300mm, Width: 500mm, Weight: max 10kg
    Pre-stretch ratio 250%/300%
    Speed of turntable 12-15rmp
    Packing speed 20-30 pallets/hour
    Operation mode button control
    Power supply 380V, 3Ph, 50/60Hz( 220V, 480V.... available to customize)
    Compressed air supply NA
    Output 3.0kw
    Gross weight app 1200kg
    Optional Accessories
    Film cutter
    for clamping, cutting the stretch film

    Key Features

    • Button control — the whole cycle runs from a simple panel, with no programming or wrap recipe to key in at the start of a shift.
    • Automatic height sensing — the film carriage finds the top of the load by itself, so a short skid straight after a tall one needs no resetting.
    • Pre-stretch function — film is stretched before it reaches the load, which pulls the wrap tighter and uses less film per skid.
    • Adjustable wrap settings — tension, overlap rate and the extra reinforcement turns at the top and bottom are all set on the display, so different films and load types are handled by changing settings rather than parts.
    • Inverter-controlled motion — the arm and film carriage speeds run through inverters, which smooths the start and stop of each cycle and reduces strain on the drive.
    • Extended beams — longer arm beams steady the rotation and cut down the vibration that shows up as a wandering film line.
    • Automatic return — the arm goes back to its starting position when the wrap finishes, leaving the wrapping area clear for the next load.

    FAQ

    What loads is this skid wrapper designed for?

    It is built for wooden skids and pallet cargo — board packs, cartons, bagged goods and similar workshop loads that arrive at the wrapping position already stacked. Loads a forklift or pallet jack can bring in are normally straightforward to wrap; for anything unusually tall, narrow or top-heavy, send us the details and we will advise.

    What stretch film does the machine take?

    The film carriage accepts a 76 mm paper core, a roll width of 500 mm, an outer diameter of up to 300 mm and a roll weight of up to 10 kg. Pre-stretch runs at 250% or 300%, and the tension setting can be adjusted to suit different film grades, so you are not tied to a single film specification.

    Does the machine cut the film at the end of a wrap?

    A film cutter is available as an optional accessory. It clamps the film and cuts it cleanly at the end of the cycle, which removes the manual step of reaching in to cut and hold the tail. If you wrap a high number of loads in a shift, it is worth adding to the order.

    Does the machine need a compressed-air supply?

    No. The wrapper runs on electricity only, with no compressed-air line required, so nothing extra has to be run across the workshop floor. That also means it can be placed where an air drop is not available, provided the electrical supply on site matches what the machine needs.

    Can we move the machine if we reorganise the workshop?

    Yes. It is a floor-standing industrial pallet wrapper, so nothing is built into the floor around it. When the layout changes, the column can be lifted and moved as one piece with the usual workshop lifting gear; allow for a fresh check of the wrap settings and the film path once it is standing in its new position.

    How much maintenance does it need day to day?

    Routine attention is enough. Keep the film path and carriage area clear of offcuts, check at the start of a shift that the arm travels smoothly through a full rotation, and recheck the wrap settings after loading a new film roll. As on any industrial stretch wrap machine, that short daily check is what keeps the wrap consistent from load to load.