Semi-automatic orbital stretch wrapper HM-S600 has a large ring which capable to wrap large bundle of long cartons, aluminum profiles, steel rods, copper tubes and steel pipes as well as wooden posts and panels......
There are two ways for machine start and stop, first is by footswitch and the second is by automatic photocell sensor detection.
Both unmanned roller tables for objects in-feeding and out-feeding, manually push forward by man power and it's easy to control to get your ideal packing result.
Machine has automatic film cutter which is about to cut the film after wrapping and load the material for next wrapping. For HDPE and knit belt or composited paper material, we provide customized material cutter to match your needs.
For small business and low quantity manufacturing, it's a good machine to enhance your packing capacity while getting a better and tight package.
Features
Through programmable PLC with customized program to achieve semi-auto operation.
Foot switch and photocell sensor for machine start and stop.
After rotation is finished the wrapping material can be cut automatically.
Mushroom button, to stop the machine when emergency happens.
Adjustable ring rotation speed through frequency inverter.
Stretch film tension could be adjusted to make tighter package.
Film spool is workable for different packing materials.
Top press rollers are optional to add to fix the product for keeping it stationary.
Technical Parameter
| Packing size |
L800-unlimited, W150-500mm, H100-300mm (available to customize) |
| Max weight |
100kg (available to customize) |
| Film roll dimension |
|
| ID |
50mm |
| OD |
max 200mm |
| Width |
100-150mm |
| Stretch film thickness |
20-35 microns |
| Speed of ring rotation |
80-90rmp |
| Overlapping rate |
15-90% |
| Wrapping speed |
8-11m/min |
| Operation mode |
semi-automatic operation |
| Power supply |
380V, 3Ph, 50/60Hz( available to customize) |
| Output |
0.75Kw |
Machine Overview
HM-S600 is a semi-automatic orbital wrapper built around a large ring that carries the film carriage right around the bundle. The load sits on free-rolling tables, the operator pushes it through the ring by hand, and the film is applied as the bundle passes — so long profiles and cartons that are impossible to wrap neatly by hand come off the line tight and uniform.
It is aimed at smaller plants and lower-volume producers that want better packing without committing to a fully automated line. If you are looking for an orbital stretch wrap machine for one product family rather than a plant-wide system, this model fits that gap: quick to set up, simple to run, and easy to change over when the next bundle is a different size.
Bundle Types & Applications
- Long cartons — the large ring passes full-length cartons and case bundles, so the operator feeds the load straight through on the roller tables instead of walking around it with a film roll.
- Aluminum profile bundles — the film is laid around the whole bundle, holding the profiles together and keeping finished surfaces away from metal-on-metal contact in transit.
- Steel rods and copper tubes — dense, rigid packs. An orbital stretch wrapping machine wraps the entire cross-section in one continuous spiral, so rod and tube bundles stay tight through stacking and shipping.
- Steel pipes — long pipe stacks are pushed through the ring as they are, and the wrap follows the bundle shape even when the pipes are not perfectly aligned.
- Wooden posts and panels — square posts and flat panel bundles both run on the same ring, which suits timber workshops that change product from one job to the next.
Specifications
| Parameter | Value |
|---|
| Packing length | 800 mm and above (available to customize) |
| Packing width | 150-500 mm (available to customize) |
| Packing height | 100-300 mm (available to customize) |
| Ring rotation speed | 80-90 rpm |
| Control | PLC with customized program |
| Motor output | 0.75 kW |
Controls & Operating Sequence
- Load the bundle — the in-feed and out-feed tables roll freely, so a heavy pack of profiles or posts is pushed into the ring by hand instead of being lifted onto it.
- Start the cycle two ways — press the footswitch, or let the photoelectric sensor pick up the load and start the ring on its own. On this horizontal orbital stretch wrapping machine the operator can keep both hands on the bundle.
- Set the rotation speed — ring speed is adjusted through the frequency inverter, so a light carton bundle and a dense bundle of steel rods can each run at the pace that suits them.
- Let the film cut itself — when the rotation finishes, the automatic film cutter cuts the wrap and positions the material for the next bundle, so nobody handles a knife between cycles.
- Stop immediately if needed — the mushroom button on the control panel halts the ring at once.
- Unload — the wrapped bundle is pushed off on the out-feed table and the next one goes straight in.
Film & Packing Materials
- Roll fit — the carriage takes 50 mm core rolls up to 200 mm outside diameter and 100-150 mm wide, the core size most stretch wrapper manufacturers build to, so the film you already buy still fits.
- Film thickness — the machine runs 20-35 microns stretch film. A lighter gauge suits cartons and light panels, while a heavier gauge gives a firmer hold on dense metal bundles.
- Tension control — film tension is adjustable, so you can pull a load tight for long transport or ease off when a surface marks easily.
- Spool flexibility — the film spool is built to take more than one type of packing material, which matters if you plan to change wrap material later on.
Who It's For
The machine suits plants that wrap a steady but not continuous flow of long products. Profile extruders, tube and pipe producers, timber and door fabricators, and packers handling mixed bundles all use an orbital stretch wrapper of this size because it copes with length while staying compact and simple to operate.
It is also a practical first step away from hand wrapping. One operator loads, wraps and unloads; the ring and film carriage handle the repetition, and the PLC program keeps every cycle the same. Because we are stretch wrapper manufacturers ourselves, the ring opening and the table length are set at the build stage around the bundles you actually run, so the machine arrives ready for your products.
Technical Support & Model Matching
Choosing the right pallet handling or wrapping machine depends on your load, pallet or skid type, available floor space and how the equipment fits your production or packing line. Share your working conditions with us and our technical team will help match a suitable model, from compact semi-automatic units to automatic inline systems. We also support troubleshooting, spare parts advice, and installation and commissioning guidance so your machine starts up correctly and keeps running in daily operation.
FAQ
Does the wrap cover the whole bundle or leave open bands?
The ring carries the film around the full cross-section while the bundle moves through it, so the film builds up in a continuous spiral along the length. How tight that spiral sits is set by the overlap on the control: at a high setting the bundle is covered end to end, at a low setting you use less film and get a lighter hold. The two ends of the bundle stay open.
Can it wrap bundles that are round or uneven?
Yes. The opening takes rod and tube packs, mixed profiles and timber bundles, and the wrap follows whatever cross-section you push through. If a load is inclined to roll on the tables, optional top press rollers hold it steady during the cycle — worth having if you wrap a lot of round stock on this orbital stretch wrapping machine.
Can we wrap with something other than stretch film?
The spool takes other packing materials as well as stretch film. HDPE tape, knit belt and composite paper all run on the machine, but they are not cut by the standard blade, so we supply a customized cutter matched to the material. Let us know what you plan to run and this orbital stretch wrapper leaves the factory set up for it.
How much setting up does an operator have to do?
Very little. Ring speed, film tension and overlap are set once for a bundle type and then left alone, and each cycle is started by footswitch or by the photoelectric sensor. The PLC program runs the same sequence every time, so a new operator can be shown the controls in one session and the wrap quality stays consistent from shift to shift.
What if our bundles are larger than the standard range?
Wider, taller and heavier loads are built to order. Send the biggest bundle you run — cross-section and length — and we set the ring opening, the table length and the load rating to suit it. On a horizontal orbital stretch wrapping machine the ring is the part that limits bundle size, so that is the first thing we check against your product.
What daily maintenance does the machine need?
Keep the film carriage rollers and the cutter blade clean so the film feeds straight and cuts cleanly, and wipe the photoelectric sensor lens so it keeps detecting bundles reliably. Check the tension now and then against a finished wrap; if the wrap starts feeling loose, a small adjustment on the tension control usually settles it. Rollers and blades are normal wear items, so keep a spare set on hand.