Stainless steel L bar sealer shrink wrapper for packing medicine and drug SW-L400-M

A stainless steel made thermal packing machine for medicine and drugs. L bar sealer for heat sealing the plastic wrap and shrink oven for making the package tidy with good tension.
  • Standard machine: Yes
  • Description
    Fully automatic "L" type sealing and shrinking machine SW-L400-M is made of stainless steel, fit to pack medicine and drug related medical products. 
    L bar sealing shrink wrapping machine for packing pharmaceutical
    With high efficiency, automatic film feeding and perforation device, the machine has perfect continuous performance. 
    Manual adjustment of film guide system enables the machine to cover a large range of product size. 
    The SW-L400-M model also has a tight joint function, which is specially designed for packaging small products. When the size of the package changes, the adjustment is very simple, without changing the mold and bag form.
    Features
    HMI for setting re-adjusting and data input.
    Automatic feeding, length can also be adjusted automatically by the combination of electric eye and timer. 
    Equipped with an induction motor to automatically take up waste.
    Using the original "Omron" digital display thermostat, built-in PID function, the sealing temperature is extremely sensitive and accurate, and can be set at will. 
    The sealing knife itself also has an automatic protection function, which effectively prevents miscut packaging, and has an automatic alarm function, which greatly improves the safety of the operator.
    According to different products, it is equipped with imported detection photoelectric, one set of horizontal and vertical detection, which is convenient to switch and choose. 
    For thin and small packaging, it can also easily complete the sealing and packaging operation.
    Rollers of conveyor are made of silicion coated rods, able to resist high temperature.
    The sealing knife adopts Teflon coating anti-sticking and high temperature resistant aluminum alloy knife, and the sealing will not crack, coke, smoke, and pollution.
    Strong wind cooling system, cool down the products instantly after heat shrinking.
    The entire machine is truly connected to the production line for automatic and human less running. The specially designed film up and down synchronization mechanism can correct film deviation.
    stainless steel made shrink wrapping machine
    recycling wheels of the L bar shrink wrapper
    stainless steel shrink wrapping machine for packing medicine
    Technical Parameter
    Sealing type L-bar heat sealing blade
    Power supply 380V/50-60Hz/3phase
    Product size Width≤350 mm, Height≤125 mm
      width+height≤400 mm, length+height≤480 mm
    Conveyor system straight conveyor
    Packing capacity 10-25 packs per minute (depends on product size)
    Film type center-folded polyolefin(POF)film
    Max film roll dimension 530mm (width) x 280mm(outer diameter) 
    Power consumption max. 12kw
    Heat tunnel conveyor chains with silicon coated rods
    Machine material stainless steel
    Weight 460kg
    Optional Accessories
    Extra conveyor belt
    Extending the length of in-feeding system
    Special in-feeding mechanism
    Consisted of pusher conveyor.... for automatic products stacking, bundle forming, in-feeding



    Sealing System & Temperature Control

    • L-bar sealing blade: a single L-shaped blade seals two sides of the sleeve in one stroke, so boxed products come out with a clean edge and no side trim to handle.
    • Set-and-see temperature: this heat shrink wrap machine uses an original Omron digital display thermostat with a built-in PID function, so the sealing temperature shows on the panel and stays accurate when you adjust it for a new film or a thicker carton.
    • Non-stick sealing knife: the blade is a Teflon-coated, high-temperature aluminum alloy knife, which is what keeps an industrial shrink wrap machine sealing cleanly — no cracked, scorched or smoking seals, and no film residue building up on the blade.
    • Cooling after the tunnel: a strong wind cooling section brings each pack back to handling temperature quickly, so wrapped cartons can be taken off the line without a long wait.

    Specifications

    ParameterDetail
    ModelSW-L400-M
    Machine typeAutomatic L-bar sealing and shrink packaging machine
    Max film roll530 mm wide × 280 mm outer diameter
    ControlHMI panel for setting, re-adjusting and data input
    Optional accessoriesExtra conveyor belt; extended in-feed section; special in-feed mechanism

    Typical Applications

    These machines go into pharmaceutical and medical packing rooms, where the same kinds of packs run day after day: boxed tablets and capsules, over-the-counter medicine cartons, first-aid and dressing boxes, small diagnostic kits, and the boxed accessories that ship with a medical device. Flat, rectangular packs suit it especially well, because the L bar needs a straight edge to close against. As a shrink wrapping machine on a medicine line it usually sits at the end of the process, after cartoning and before coding or palletizing, so packs reach the next stage sealed and uniform. Cartons that are thin and light go through at the same steady pace as heavier ones.

    Film Feeding & Alignment

    • Automatic film feed: on this automatic shrink wrap machine the roll pays out into the sealing station on its own, and the perforation device releases trapped air so the film pulls down tight instead of ballooning in the tunnel.
    • Film synchronization: a specially designed up-and-down mechanism moves the top and bottom film together and corrects deviation before it reaches the seal, so the fold stays centered even as the roll gets smaller.
    • Product detection: imported photoelectric sensors are fitted, with one set for horizontal detection and one for vertical, and you can switch between them to suit the pack and film you are running.
    • Waste take-up: an induction motor winds the trimmed film away continuously, so offcuts do not collect around the sealing area.
    • Roll changes: a fresh roll is loaded on the mandrel and threaded through the guides by hand, so keep a spare roll of your film on site and a change never holds the line up for long.

    Product Size & Carton Fit

    Max product width350 mm
    Max product height125 mm
    Width + heightup to 400 mm combined
    Length + heightup to 480 mm combined
    Size changeovermanual film guide adjustment
    Toolingno molds or bag formers required
    Small packstight joint function keeps the film close to the product
    Ideal-fit pack shapeflat, rectangular cartons with a straight closing edge
    Round or irregular packslimited fit, as the L bar needs a straight edge to seal against
    Size to quotethe filled, closed carton measured at its widest point
    Edge conditiona squared, taped carton seals more cleanly than a bulging pack
    Pack stabilitya flat, firm base keeps the carton square along the line

    Ordering & Installation Notes

    1. Send us your packs: a sample carton or its exact dimensions, plus the number of packs you run in a shift, so we can confirm the format suits the machine before you commit.
    2. Check the installation point: confirm that a suitable power supply is available on site, that there is room for the machine and the operator, and how it will link to the conveyor you already have.
    3. Choose the in-feed arrangement: the standard straight conveyor suits cartons that arrive at a steady spacing, while the optional pusher conveyor and extended in-feed are for products that need stacking or bundle forming first.
    4. Plan your film: decide which film you will run and keep spare rolls on site so a roll change does not stop the line.
    5. Fix the settings with the builder: Emanpack is the team that builds this shrink wrapping machine, so the film guide, sealing temperature and tunnel settings can be prepared around your carton before the machine is shipped.

    FAQ

    What happens if a carton is misaligned or the seal is interrupted?

    Nothing gets forced through. The sealing knife on this shrink packaging machine has an automatic protection function that stops the stroke when a pack is out of position, and an alarm tells the operator to clear it. That keeps miscut packs off the line and protects the person working at the sealing station. Once the carton is removed, the machine picks the cycle back up.

    Does an operator have to reset the length for every pack?

    No. The length is handled automatically by an electric eye and timer working together, so packs of the same format run through without intervention. On this shrink wrapping machine the operator mainly loads film and checks that cartons come off the line clean. When the pack format does change, the new setting is made on the panel.

    Can the machine pack items that are not box-shaped?

    An automatic shrink wrap machine of this type seals most reliably around a flat, rectangular pack, because the L bar has to close against a straight edge. Round or irregular products are usually boxed or put in a tray first and then wrapped. If you are unsure, measure the box itself at its widest point rather than the loose product, and send us those figures.

    How do we keep the machine clean in a medical packing area?

    Stainless surfaces wipe down easily between shifts, and the film path can be reached without dismantling anything, so cleaning fits into a normal changeover routine. Wipe the surfaces, check that the sealing area is clear and make sure nothing has stuck to the blade before the next batch. Medicine and drug products are packed to a strict standard, so an industrial shrink wrap machine that cleans up quickly earns its place.

    What does the finished pack look like?

    The shrink tunnel pulls the film down to a tidy, tight finish, so cartons come off the line wrapped closely rather than loosely bagged. Because the film is clear, printing, batch codes and labels stay readable through the wrap, and the sealed edges sit flat at the sides of the pack. That helps when packs are inspected or coded at the end of the line.

    Who supports the machine after it is installed?

    Emanpack builds the machines it supplies and stays with them afterwards. Spare parts, technical advice on settings and help with maintenance come from the same team, and we guide installation and commissioning so the line starts up correctly. As the team that builds these shrink wrapping machines, our engineers know this model in detail and can answer questions about your own carton format.